Fiberglass mesh roll manufacturer offering white coated mesh for reinforcement and protection, supplying construction material distributors, waterproofing contractors and composite processors with consistent, ready-to-ship rolls. Every roll is alkali resistant fiberglass mesh designed for cement, gypsum and exterior wall reinforcement, built to hold its strength and dimensional accuracy after the coating, cutting and packaging stages — so what arrives on site matches what was specified.
PVC coated fiberglass mesh provides reinforcement and surface protection in construction systems, and is the standard specification across most of our roll production. The PVC coating locks the woven glass yarns in place at each intersection, protecting the mesh from alkaline attack during cement curing and from UV and moisture exposure once installed, while keeping the open mesh structure that allows mortar and coating compounds to key through properly.
| Specification | Typical Range |
|---|---|
| Mesh weight | 60 – 160 g/m² |
| Mesh opening | 4 mm × 4 mm / 5 mm × 5 mm / 8 mm × 8 mm and custom apertures |
| Coating | PVC (white, or color to match project specification) |
| Roll width | 1 m, 1.1 m, 1.25 m or custom width |
| Roll length | 50 m, 100 m or custom length |
High tensile fiberglass mesh fabric distributes stress and helps prevent cracking across the reinforced surface, which is the main reason it is specified over lighter, uncoated alternatives. Warp and weft yarns are interlaced and bonded under controlled tension so that load is shared evenly across the mesh rather than concentrating at a single point, reducing the risk of localized tearing during installation and over the long-term service life of the wall or render system.
Fiberglass mesh for concrete reinforcement provides crack control and dimensional stability, and is widely embedded into render coats, screeds and cement-based overlays. Because the mesh is alkali resistant, it maintains its tensile properties throughout the curing process and beyond, rather than losing strength as the cement hydrates — a common failure point with non-coated or non-alkali-resistant mesh products.
Fiberglass mesh for waterproofing improves puncture resistance in membranes and coatings, reinforcing liquid-applied and torch-on waterproofing systems against tearing during installation and against stress cracking as the substrate moves. It is commonly embedded between coating layers on roofs, balconies, basements and below-grade waterproofing systems where membrane integrity is critical.
Q.What roll sizes are available for PVC coated fiberglass mesh?
Standard rolls are supplied in 1 m, 1.1 m and 1.25 m widths with 50 m or 100 m lengths, and custom widths, lengths and core packaging can be arranged for bulk or project-specific orders.
Q.Is the mesh suitable for both cement and gypsum-based systems?
Yes. As an alkali resistant fiberglass mesh, it is formulated to retain tensile strength in cement, gypsum and other alkaline construction environments, making it suitable for render, EIFS, screed and drywall reinforcement applications.
Q.Can mesh weight and aperture be customized?
Yes. Mesh weight, opening size and PVC coating color can be adjusted to match the reinforcement strength and surface finish required for your project.
Q.Do you supply directly to contractors and distributors, or only in bulk?
As a fiberglass mesh roll manufacturer, we support both sample/small-quantity orders for evaluation and full bulk production runs for distributors and contractors with recurring volume needs.
